Hello! First, I have to say that I absolutely LOVE the Hammerskin! I've been playing around with it for a few days and finally have everything going good.
However, I was troubleshooting some things with UK_Skinner and found a bug. UK_Skinner checked the skin and confirmed it.
I have my radar image coming up perfectly when I click the green radar icon. However, I also added a traffic map into my radar.txt.
The traffic map is downloaded successfully to my device, but when I go to the radar screen to check it, it only lets me see the radar page! I can't scroll over to the next page to get the traffic map.
Thanks for your help and keep up the amazing work!
Jim
Wichtel:
I also tried to load real_VAG skin under "SE_VGA" mode, the image switch (righ/left) arrow did not work either. However, the region,7,7 worked fine.. The codes in regiom,7,6 were identical to the ones in VGA skin. I know you will have a way to find out the bug...
How many City´s use you for the Weather forecast and how many pictures have you downloaded for Radar. The Number of City´s and the Number of Pictures must by identical, otherwise it comes to a fault.
Edit: this is for Region 7,6
Wichtel:
My set up run great using the VGA skin, and I just load the real_VGA skin and the radar image switch did not work. Ff you load the VGA skin back again, the arrows worked again. So the images should be no problem.
One thing cause my eyes (4 of them) was, when you tap the arrows, it turned into red, just like the ways supposedly to be, but the image remianed the same. No change at all. If you don't have the next image, it should turn into blank, but it did not. The original radar image was still there.
I have tested the RealVGA Skin but i found no problem. All works correct for me :knownot:
Please send me the Radar.txt, so i can check this on my Device
That is odd????
I did not download any new image. Just switch the skin to Real_VGA skin. Let me redownload the real_VGA skine and try again.
Remark: i have tested the RealVGA Skin on my Device with Se_VGA not RealVGA
I also did test it in SE_VGA, no luck...I am going to get skin now...
I cannot comprehend this for the moment, the only different between the VGA and the Real VGA Skin is the Icon size in Shortcuts. Nothing else.
Wichtel:
I don't either.
I think I missed something else. :? The VGA version did not work any more just like the real VGA version, the image will not switch. Even wrost, the radar.exe can not download the image. :wall: :wall:
I just did a hardreset and will start to reinstall everything. Perhaps there was something I did to cause this.
But just for the information, all the exes I did were done on QVGA device not on this VGA device.
Quote from: uk_skinner
But just for the information, all the exes I did were done on QVGA device not on this VGA device.
Perhaps this is the point. I have installed nones of the new exe yet since I had no time to it yet.
:?: :?: Sorry, I don'e see the poits.
The problem happened to VGA device (4705) where I DID NOT use any of these exe I made.
That´s crazy I test and test, but all work´s fine :wall:
Wichtel:
I don't think the problem was in your skin. Most likely was something in my device. That was the reason I did hardreset.
Were ist the different in our installation ?
I use TD+ completly in Mainmemory
I have installed the original TD+ dll VGA patched from BH
I have detected some trouble with the VGA skins when the dll with any mui.exe is patched.
and on your Device?
Yes, I run exe and dll on the main memory and skin packages are either in filestore or sd card.
I used Tweaks2k.net to have mui for both exe and dll. I done the BH way before, and will try do it again.
The puzzle was it just happened, your skin worked great when I first installed it. Only until yesterday when I tried to use real_VGA and it went wrong. I probably did something before that to trigger it although I still have no clue what I did. When you get old, again shortterm memory was not there. :lol:
Okay, the problem on your Device is solved. And wcjmproducer, how it looks there?
Wichtel:
I was wrong all the way!!!!!!
Everything is fine, just my misunderstanding the skin... :roll: :oops: :shock: :? :lol:
I know where I was wrong.......Since var9 was used to control image of the city. The other image should put into Radar_VGA1 folder. I was stupid.....
wcjmproducer, it was my fault. You just need to change the folder for your traffic image to Radar_VGA1.
No Problem, we all where older (http://www.cheesebuerger.net/images/smilie/muede/o050.gif) and forget something. Wenn you need help please report (http://www.cheesebuerger.net/images/smilie/muede/o060.gif)
BTW: *.exe is a registered Trademark by UK_Skinner :wink:
Thanks.. One of this day, my brain cell just ??##!!$$