Print Page - iPAQ battery meter - 0 V and not estimated time

Title: iPAQ battery meter - 0 V and not estimated time
Post by: possom on November 14, 2003, 12:02:02 PM

Hi all,

I have an iPAQ 5455, with TodayPlus and the Slider skin... when drilling down on the battery section, I only ever get the following (even after using the battery level down to around 60%):

Voltage: 0.000 V Est. Time --:--hr(s)

This may be attributed to my battery being weird, as it sometimes charges to 110% and doesn't start showing the battery level until it gets to 100%... :?

Any feedback would be appreicated.

Cheers,
possom

Title: iPAQ battery meter - 0 V and not estimated time
Post by: possom on November 26, 2003, 05:05:14 PM

Hi everyone,

I have still not determined why I am not getting a voltage or estimated time remaining... is this also happening for anyone else or any ideas on why this may be happening?

Thanks,
possom

Title: iPAQ battery meter - 0 V and not estimated time
Post by: CoolWolf on November 27, 2003, 03:04:09 PM

possom,
you may have a look at this thread (http://dark-mojo.com/TodayPlus/viewtopic.php?t=838).
When using the default slider.txt on my h2215 I could see that same as you on your h5455 for the battery status ... nothing!
Battery+ by Lordtwisted is definitely worth having a look at ... :wink:

Ciao!

TodayPlus Boards v2

TodayPlus for the Pocket PC Forums => Help and Support => Topic started by: possom on November 14, 2003, 12:02:02 PM